Oceania routing coverage

Australia Proxies

458,747+ residential and mobile proxy IPs in Australia. City-level geo-targeting, rotating and sticky sessions, HTTP, HTTPS & SOCKS5. Plans from $0.90/GB.

Pay as you go from 1 GB. Dataset updated June 2026; live availability varies by network type.

Oceania relay chain

  1. Australia458,747
  2. Fiji11,572
  3. New Caledonia11,212
  4. French Polynesia8,191
  5. Papua New Guinea7,904
  6. New Zealand7,517
  7. Vanuatu6,860
  8. American Samoa6,401

58 ASNs published for Australia.

Published Oceania pool counts from the locations dataset, updated . Live availability can change.
458,747+
Published IPs in Australia
2
Live network types
58
Autonomous systems
#1
Pool rank in Oceania
458,747+ published IPs in Australia99.9%+ uptime targetCountry, city, GPS & ASN targetingHTTP, HTTPS & SOCKS5Databay Trust Center
Live coverage

Australia network coverage

The proxy networks reported for Australia, with global catalogue size, network origin, and volume-plan entry price.

  • ISP-origin IPs for authorized regional sampling and workflows that require a consumer-network route.

    Global pool
    34M+ IPs
    Network origin
    ISP-classified
    From
    $0.90/GB (1 TB plan)
  • 4G and 5G carrier-network IPs for authorized app testing and mobile-network checks.

    Global pool
    800K+ IPs
    Network origin
    Mobile carrier
    From
    $2.50/GB (512 GB plan)

A network shows as Live only when it is currently serving traffic in Australia. Global pool sizes are catalog-wide; browse the live community proxy list for Australia to sample real endpoints.

Geo-targeting

Target Australia down to the city and ASN

Set countryCode-au in your proxy username, then layer city, ZIP, GPS, or AS number on top at no extra cost.

  • Country routing

    One flag, countryCode-au, requests an exit geolocated to Australia, subject to live availability.

  • City, ZIP & GPS requests

    Request a narrower residential location, then verify the observed exit because live supply and geolocation can vary.

  • ASN targeting request

    Request an autonomous system by AS number, subject to network support and current eligible exits.

  • Rotating or sticky

    Request gateway-selected exits or a sticky target up to 120 minutes; connections and availability affect reuse.

  • Country, city, ZIP, GPS, and ASN targeting included on every plan
  • Gateway-selected exits or sticky session targets, subject to availability
  • HTTP, HTTPS, and SOCKS5 on one gateway, no allowlisting
  • Every flag set in the proxy username, no code changes

Sample of 58 autonomous systems covered in Australia

  • AS1221 ASN-TELSTRA Telstra Limited
  • AS4764 WIDEBAND-AS-AP Aussie Broadband
  • AS7474 OPTUSCOM-AS01-AU SingTel Optus Pty Ltd
  • AS7545 TPG-INTERNET-AP TPG Telecom Limited
  • AS18371 NCABLE-AP Neighbourhood Cable
  • AS45780 BROADBANDSOLUTIONS-AS-AP Broadband Solutions Pty Ltd
  • AS133612 VODAFONE-AS-AP Vodafone Australia Pty Ltd
  • AS135887 TELSTRA-BELONG-AP Belong Telstra Limited
  • AS136000 LIGHTNING-AS-AP Lightning Broadband Pty Ltd
  • AS139077 FREEDOMINTERNET-HPL-AS-AP FREEDOM INTERNET HOLDINGS PTY LTD
  • AS149647 MUIPL-AS-AP Move Up Internet Pty Ltd
  • AS149851 ASNTELECOMPTYLTD-AS-AP ASN Telecom Pty Ltd

Select any country, city, or AS number directly in the proxy username. ASN availability varies by network type and real-time device counts.

# Rotating residential proxy in Australia
curl -x http://USER-zone-residential-countryCode-au:PASS@gw.databay.co:8888 \
     https://databay.com/cdn-cgi/trace

# Sticky session (30 minutes) in Australia
curl -x http://USER-zone-residential-countryCode-au-sessionId-abc123:PASS@gw.databay.co:8888 \
     https://databay.com/cdn-cgi/trace

# Datacenter proxy in Australia
curl -x http://USER-zone-datacenter-countryCode-au:PASS@gw.databay.co:8888 \
     https://databay.com/cdn-cgi/trace

Pricing for Australia: residential from $0.90/GB (PAYG $2.75/GB), datacenter from $0.50/GB (volume), mobile from $2.50/GB. All tiers include country targeting for Australia at no extra cost. See documentation.

Network performance

Network-wide operating targets for Australia routes

These catalogue-wide figures describe the service target, not a country-specific guarantee. Measure the exact route and workload before relying on it.

Uptime target
99.9%+
Network-wide availability
Residential latency
~1.1s
Median response time
Datacenter latency
~780ms
Median response time
Max sticky target
120 min
Subject to live exit availability

Latency and uptime are network-wide medians and targets. See how Databay benchmarks its network.

Field guide

Need rotating IPs with city and ASN targeting? Get residential proxies in Australia (34M+ IPs from $0.90/GB). Testing first? You can browse the live community proxy list for Australia (refreshed every 5 minutes).

Australia proxy coverage, in numbers

Databay's June 9, 2026 paid-network catalogue assigns 458,747 addresses to Australia. That places Australia number 24 of 195 locations worldwide and number 1 of 8 in Oceania. The Australia allocation represents 1.3% of the global catalogue and 88.5% of the Oceania total. For Australia, those figures describe catalogue breadth, not a count of exits guaranteed online at one moment. The Australia count also does not establish address ownership, consent, residential status, latency, reputation, city accuracy, or acceptance by a destination. Use the live Australia coverage panel on this page to see which Databay network types currently report service, then confirm the observed exit before relying on a result. Australia pricing is determined by network and plan rather than by inflating the country count into a performance promise.

Build a controlled Australia location test

The gateway flag countryCode-au requests an exit geolocated to Australia, subject to current supply and the selected network. For Australia, it changes one input: the apparent network origin seen by the destination. An exit geolocated to Australia does not set a browser language, currency, time zone, delivery address, tax jurisdiction, account country, cookie history, device profile, or legal eligibility. For a useful comparison involving Australia, write down the hypothesis first and hold those other inputs constant. Check the Australia exit with a diagnostic endpoint you trust, save the timestamp and effective settings, and compare the observation with a direct or controlled reference. If city, ZIP, coordinate, or ASN precision in Australia matters, validate that narrower result separately; country success does not prove subnational accuracy.

Plan Australia sessions from the actual pool scale

Australia has a deep published pool relative to most catalogue entries. Use the Australia depth for measured country-level sampling, not for routing around a quota, challenge, or block. Long-lived Australia flows should prefer a documented sticky session; independent observations can request rotation. In both Australia modes, connection reuse and live supply can produce the same exit more than once. Australia pool depth also cannot authorize collection: the destination's terms, robots guidance, contracts, authentication boundaries, rate controls, and applicable law remain the controlling constraints. Treat a block, CAPTCHA, quota, or explicit denial as a stop or review signal across the whole Australia pool rather than rotating around it. Record Australia failures as data; do not hide them with unlimited retries.

Australia in its Oceania comparison set

Australia is the largest published Oceania entry. The next entry after Australia is Fiji with 11,572 addresses; that comparison describes catalogue scale only, not quality, latency, or live availability. Choose Australia when the research question specifically needs a network-origin observation from Australia. Choose a different country from Australia only when it is a valid control or a separate market in the study. Combining Australia observations with other countries in one unlabeled dataset makes regional differences impossible to interpret. Preserve the requested Australia route, observed exit country, network type, timestamp, source, response class, and validation outcome on every retained record.

A reproducible Australia validation checklist

Before using a Australia result, capture five things: the canonical source URL and permission basis; the Databay network and countryCode-au setting; the observed exit IP, ASN, and geolocation source; the browser, account, language, currency, address, cookie, and device state; and the UTC timestamp plus response evidence. Repeat the Australia check from a controlled reference and label missing, blocked, challenged, stale, or personalized responses instead of treating them as ordinary content. For a consequential Australia price, availability, advertising, search, compliance, or product decision, obtain a second authorized source or local review. This Australia workflow makes the 458,747-address catalogue figure useful as coverage context without pretending it proves a resident's experience.

Australia proxies

Frequently asked questions

How many proxy IPs does Databay have in Australia?
Databay offers 458,747+ residential and mobile proxy IPs in Australia, with city-level and ASN geo-targeting.
What types of proxies are available in Australia?
Databay provides residential and mobile proxies in Australia, all with rotating and sticky sessions over HTTP, HTTPS, and SOCKS5.
Which networks and ASNs are covered in Australia?
Coverage in Australia spans 58 autonomous systems across 2 network types, selectable by ASN in the proxy username.
How do I authenticate with Databay proxies?
Authentication is by username and password over the gateway. Country, city, ASN, and session are all selected with flags in the username, so no IP allowlisting is required.
Which protocols are supported?
HTTP, HTTPS, and SOCKS5 are supported on the same gateway, with both rotating and sticky sessions.
Is there an API?
Yes. Proxies are delivered through a single gateway endpoint; pool, geo, and session are controlled entirely through the username flags, so any HTTP client or scraping framework works unchanged.
How do I get started?
Create an account, choose a plan, and the dashboard issues gateway credentials you can use immediately.
Do you offer reseller or volume plans?
Yes. Volume and reseller pricing is available for larger commitments. Contact sales for a quote.

Start using Australia proxies

Review live Australia coverage and access the published pool under the selected plan and service limits.

Pricing, order minimums, and traffic validity vary by product.